CARMATRIX Solar Wireless Reversing Camera in License Plate with Monitor Reversing System Car

Easy-to-retrofit car rearview camera without drilling or complex cable routing. In a maximum of 10 minutes, you can install the rearview camera on your car in no time.
Simply replace the license plate holder, whether front or rear, position the monitor and connect it to the cigarette lighter.

With Easy-Start thanks to the touch button on the top of the monitor and Quick-Start on the cigarette lighter, the monitor can also be activated.

On-Touch trigger button on the cigarette lighter plug for drivers who suddenly want to see the rearview while driving or need more than 90 seconds of reversing time.

With the CARMATRIX Solar Reversing System, parking becomes child's play.

The rearview camera can be used both at the front and rear of the vehicle.

Flexible monitor mounting with the 2 included brackets and voltage adapter with 12 – 32 V input voltage, as well as an integrated USB charging socket.

The monitor is powered via the cigarette lighter or via a 5V USB-C socket on the vehicle.

Thanks to the solar panel, the rearview camera is constantly charged, and thanks to the integrated 2,100 mAh Li-Po battery, a long operating time is guaranteed.

Thanks to the digital and encrypted radio technology, smooth operation of the car rearview system is possible.

The system is primarily designed for cars.

Alternatively, we also offer this system without a solar panel with IR night vision for direct connection to the reversing light.

Features:

• Plug & Play Installation
• No drilling or complex installation
• Environmentally friendly solar technology with powerful batteries
• USB charging socket integrated in the power supply for mobile phones etc.
• Radio range 17.5m
• Displayable/hideable distance lines
• Installation at the front or rear of the vehicle
• Distance lines adjustable in height and depth in 5 positions
• Powerful Li-Po battery with 2,100mAh
• Stable radio signal thanks to external antenna on the monitor
• Using a vibration sensor, the camera automatically detects when it is not needed and switches to standby.
As soon as the sensor detects a vibration, the camera switches back on.
• 2 flexible monitor mounts for up to 3 mounting options
• On and off switch on the monitor or cigarette lighter
• Monitor power supply via cigarette lighter plug or optionally via 5V USB-C
• Flexible for use in cars

Specifications:

Monitor
• Display: 4.3ʺ TFT-LCD monitor
• Resolution (W x H): 480 x 272 px
• Image size (W x H): approx. 95 x 54 mm
• Refresh rate: 30fps
• Menu settings: Brightness, Contrast, Saturation, Mirroring, Parking guidelines, Firmware
• Adjustable display time: 30, 45, 60 and 90 seconds
• autom. activation: via vibration (G-sensor)
• additional activation: by button press on the monitor or via cigarette lighter
• Activation: via touch button on the monitor or cigarette lighter plug
• Video system: MJPEG
• Input voltage (with cigarette lighter plug): 12 – 30 V DC
• USB-C input voltage: 5V
• Power consumption: ≤ 1.3 W
• Dimensions (W x H x D): 116 x 76 x 30 mm

Wireless Solar Rearview Camera
• Viewing angle (Horizontal / Vertical / Diagonal): 135° / 90° / 165°
• Camera horizontal adjustment angle: 114°
• Resolution (W x H): 640 x 480 px
• Light sensitivity: only 0.5 Lux
• Refresh rate: 30fps
• Video system: MJPEG
• Operating voltage: 4.5 – 5.5 V DC
• Power consumption: ≤ 1.4 W
• Solar panel: 2 x 5V/0.5 W
• Li-Po battery: 3.7 V/2.100 mAh
• Operating temperature: -20°C – 60°C (max. 70% RH)
• Dimensions (W x H x D): 529 x 150 x 35 mm
• Protection class: IP67

Suitable for all EU license plates (except Austria as these are 1cm higher) single-line license plates: Width: 520 mm, Height: 110 mm

Wireless Network
• Frequency band: 2.4 Ghz (Digital without interference)
• Frequency range: 2.400 – 2.483.5 MHz
• Modulation type: GFSK
• Modulation type: FHSS (Frequency Hopping Spread Spectrum)

Scope of delivery:
1x Monitor
1x License plate holder with rearview camera and 2 solar panels
1x Clamp mount
1x Suction cup mount
1x Power supply for cigarette lighter
1x USB charging cable
4x Screws for license plate holder
1 x Quick guide in German

Tested by Warentest Online - German Institute for Product Testing - 10/2023 (License number: 20231230)

CARMATRIX Solar License Plate Reversing System

The Carmatrix rearview camera system impresses with its easy installation, user-friendliness, and practical solar function, which allows for continuous use without the need for regular manual charging. An ideal upgrade for vehicles looking for a reliable and uncomplicated rearview camera.